Jump to content

6901-0080 / 6902-0040 After Exchange Of Aom Driver


YEP

Recommended Posts

As topic suggets not much going on with this qss 3001.

 

I've read that checking leds on main image PCB and reseating/exchanging RAM is the way forward.

 

I'm wondering if this could be related to the input/output cables for the AOM driver too ?

 

 

I need some serious help here going forward eliminating errors :-)

 

Kind regards

Link to comment
Share on other sites

Can be very simple - maybe you accidentally disconnected ( or broke ) cable which is connected to printer control pcb ( board beside AOM drivers ) . Check it. This cable is used for ARCNET connection between printer control pcb and image processing pcb. If cable disconnected you will have ARCNET error with image processing.

Edited by Minilab service
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...