Jump to content

Help ~ Lost Data Of Noritsu 2711 - Si-1080 Film Scanner ~


Recommended Posts

Hello all,


3 days ago, I did the "film advance correction" and the system appears error that it couldn't be corrected. So the strange problem was coming, the scanner can't correct the daily correction(can not work the full correction neither minimum calibration) which request by the DLS Software every day .


I went to the "scandiag.exe" and intented to correct the error, and I restore the NVMemory but it appears error of the checksum that sound like my backup data corrupted, and then my magnification motor position and focus motor position had been changed and I didn't copy the data, so now I don't know the  correct values of these datas(something like attached image). Now the scandiag can not correct the focus neither the magnification automatically.


I will be very appreciated if you can provide me your NVMemory.dat and/or the magnification motor position and focus motor position.


thank you,


Link to comment
Share on other sites

  • 2 months later...
  • 5 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...