Jump to content

Dks3 Centering Problems, Please Help!


Recommended Posts

I want to print 12,7x178 prints using double piste magazine. I've done basically everything, by the book, I just can't center them. When I load 102 paper double piste it works perfect, but when I load the 127 It gets cut off and I get white margins. Spent two days trying the Magazines offsets back and forth to no avail, always getting the white margin, the best I could get down to was 3mm white margin. When I do PAPER CUTTER & PHD2 I have to do it with 102 paper, it won't print with 127 paper, don't know if it's normal or not. Also when I try to do MM/TOP EXPOSURE PLANE it won't print neither with 102 or 127 paper, the file is sent to 102A, load the 102A paper mag and nothing, won't print. Please any tips will be enormously appreciated. Thanks!!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...