Jump to content

R1 Print In Progress?

Nikola Vidović

Recommended Posts



Our R1 was working great until some day when it won't feed paper - it just stays "Printing. Do not change magazine." After that we needed to restart it few times to make it work again and after few prints problem shows again. Temperature sometimes also shows **,* without numbers and LCD response to commands is very very slow. My doubts were serial port on Linux machine, but I tested it and it is all fine. Also, changed all backups, tried everything I know/thought it was. Maybe buffer board is bricked or something else? Did anyone had such problems ?



Link to comment
Share on other sites

  • 3 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...