Jump to content

D3 Lazer Power Green Too Low


tdennis

Recommended Posts

I have a d-lab3 which keeps giving 'lazer power green too low' have changed the lazer to a spare one which I presume is ok and get 'laser power blue too low', tried another laser and the same message comes up. Have tried two other fibres and tried realigning the fibre at both ends but am struggling to get the monitor diode g/b up to 2000, the values fluctuare wildly, am suspecting it could be the laser power supply, have tried a spare one I have but not sure how good the spare supply is, any thoughts? Laser power is 790mv, 5.2A, its old but seems to light and work.

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
DL650
DX100