Jump to content

Fuji 7500 Print Lines


Recommended Posts

Which laser type you have ? (H or I , can see in software version menu ) . This laser has only one AOM and AOM driver ( G channel ) , but I can see all color on your noise. I don't see noise on Cyan color and white, so G channel AOM works-of course can't see noise there. Try to print the same test, but one color  ( Cyan, Magenta, Yellow with different density levels ) . Then look where you see noise. Also can make print with all three colors on one photo ( Cyan, Magenta, Yellow test ) . AOM driver is made by Noritsu. To be sure you that it is working can test it on any Noritsu minilab ( even oldest ) . Also it can be laser noise, noise from LVDS, image processing, laser control and many other reasons. More can tell when get information from you.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...