Jump to content

Noritsu V50 Neg Processor P2 Pump Has Stopped..


m-goulden

Recommended Posts

Hi go a problem with our Noritsu v50 c-41 processor

When you turn it on in the morning a message come up P2 circulation pump has stopped but if you look around the racks and filters it is definitely circulating ok and the temp is increasing ok ..

If you let it sit for 10min the message goes away..

I have dumped Bleach tank and filled with water to check the circulation and the circulation is very very strong..

Is there a sensor that needs cleaning and if so where is it located?

Any help would be great thanks..

 

 

Link to comment
Share on other sites

  • 1 month later...

pump has more wires on its connector plug.  Pump has internal flow sensor which may defect although pumps is running.

Expensive way :  replace the pump with a new one.

Economy way  :   do some wiring change to cheat the CPU board / without replacing pump.    I have not done this again for many many years.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
DL650
DX100