Jump to content

Dlab1 Licence Key Activate


Recommended Posts

The licence key for the machine is ONLY for the D-Lab software.


Any addons such as File Print, Index, Slide Print etc all have their own licence keys. If the machine originally had the facility for File Print the key would have been provided in an email from Agfa and not on a CD.


If you don't have that I think your only option would be to contact SAAL in Germany or poss Minilab Factory in the States. What they charge I don't know but usually anything to do with Agfa is not cheap.

Link to comment
Share on other sites

If that is the case you should be able to manually enter the code.


Before doing any of the following, make sure you make a backup of all your settings.


Once all settings saved do the following:-




Highlight the one that you want to do (File Print) and click INSTALL and you should then be asked to enter the code


If the code is correct you will be good to use File Print

Edited by Richard SPC
Link to comment
Share on other sites

  • 5 years later...
  • 5 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...