Guest Posted May 23, 2014 Report Posted May 23, 2014 What is capacity on first place? Prints per hour? Ability to get more images in memory? When to install capacity booster? Before or after MS01? Do capacity booster need some settings? Installation is next>serial>machine serial>next>finish. How to check that capacity booster is properly instaled? As far i understand only machines that have some aditional board inside have option to install capacity booster. We speak about LP7200. Tnx
Minilab service Posted May 23, 2014 Report Posted May 23, 2014 (edited) Fuji LP7200 is made by Noritsu. It will be equiv with QSS-3502F ( Fuji cartridge replenishment system ) . This minilab already use capacity booster type D and it is fastest minilab in this series. To have capacity booster working have install Sentinel driver and capacity booster software. Minilab have to be registered in minilab specification menu. Additionally on LP7200 can be installed long length printing kit ( Z811192-01 - software and some hardware elements ) . After instillation and option registration can print 914.4 mm length ( instead 610 mm ) . Capacity booster gives more prints per hour. LP7100 ( QSS-3501F ) and LP7200 ( QSS-3502F ) is the same minilab. Only one difference between them - to LP7200 attached capacity booster type D . LP7100 can make about 810 10x15 size prints and LP7200 can print about 1040 .If to LP7100 attached capacity booster type D and install software and drivers in minilab specification you can register it as LP7200 and make 1040 prints after that. Edited May 23, 2014 by Minilab service
Minilab service Posted May 23, 2014 Report Posted May 23, 2014 (edited) Fuji LP7200 is made by Noritsu. It will be equiv with QSS-3502F ( Fuji cartridge replenishment system ) . This minilab already use capacity booster type D and it is fastest minilab in this series. To have capacity booster working have install Sentinel driver and capacity booster software. Minilab have to be registered in minilab specification menu.Additionally on LP7200 can be installed long length printing kit ( Z811192-01 - software and some hardware elements ) . After instillation and option registration can print 914.4 mm length ( instead 610 mm ) .Capacity booster gives more prints per hour. LP7100 ( QSS-3501F ) and LP7200 ( QSS-3502F ) is the same minilab. Only one difference between them - to LP7200 attached capacity booster type D . LP7100 can make about 810 10x15 size prints and LP7200 can print about 1040 .If to LP7100 attached capacity booster type D and install software and drivers in minilab specification you can register it as LP7200 and make 1040 prints after that. Edited May 23, 2014 by Minilab service
surviving Posted May 23, 2014 Report Posted May 23, 2014 THANK 'S A LOT FOR INFORMATION WebRep currentVote noRating noWeight
Guest Posted May 23, 2014 Report Posted May 23, 2014 Wow! Thanks for Gr8 explanation! May I ask what is it for Sentel Drivers? I have found instalations here: http://www.safenet-inc.com/support-downloads/sentinel-drivers/ Just install right? Tnx.
Minilab service Posted May 23, 2014 Report Posted May 23, 2014 Yes, there latest Sentinel drivers. Can run protection installer and it will be installed.
Guest Posted May 24, 2014 Report Posted May 24, 2014 I have installed Sentel drivers. How i can check is installed properly. My software versions are: Main: 3.10.001 Printer I/F main:4.021E Printer:1.049 1.010 Processor:1.045 Laser: 1.028 X1 HhB1 H It seems that i have Capacity Booster type E (it say E on big green box).
Minilab service Posted May 24, 2014 Report Posted May 24, 2014 Printer I/F main:4.021E - E at the end means you have capacity booster type E. Now can check what you see in optional software, function and option registration, machine specification and output device registration menu.
yustas Posted May 24, 2014 Report Posted May 24, 2014 Wow! Thanks for Gr8 explanation! Here spec for LP7100 & LP7200 for your perusal. A lot of interesting information. http://business.fujifilm.co.uk/media/site/helpers/downloadFromRepository.php?file=/media/dContent/mediaCentre/Frontier-710/pp3-b1341e.pdf
baya933 Posted July 8, 2014 Report Posted July 8, 2014 if you don't have the dongle i can send you software to emulate the dongle, i made emulator to dongle A,C,B,C,D,E just to use in my labs but i can share
Guest Posted July 26, 2014 Report Posted July 26, 2014 Printer I/F main:4.021E - E at the end means you have capacity booster type E. Now can check what you see in optional software, function and option registration, machine specification and output device registration menu. Can you tell me how to check this? Tnx
Minilab service Posted July 28, 2014 Report Posted July 28, 2014 It's very easy. Just go to software version check and you see all in Printer line. On optional software menu you should see installed capacity booster software. On machine specification menu 7200 should be selected ( there will be choice between 7100 and 7200 ) . By the way - 7100 and 7200 are different minilabs. To make 7200 from 7100 capacity booster not enough - hardware modification require ( similar to make Noritsu QSS3502 from QSS3501 ) .
MFOTO Posted February 13, 2018 Report Posted February 13, 2018 Hi. the capacity bosster for fuji 7500 can be used with noritsu software?
MFOTO Posted February 13, 2018 Report Posted February 13, 2018 I mean the CD to setup ...can be installed=?
Minilab service Posted February 13, 2018 Report Posted February 13, 2018 Yes, can. You have to install it. Otherwise minilab will work more slowly.
Reginaldo Gonçalves Posted October 13, 2024 Report Posted October 13, 2024 On 07/07/2014 at 21:07, baya933 said: se você não tiver o dongle, posso lhe enviar um software para emular o dongle, eu fiz um emulador para o dongle A, C, B, C, D, E apenas para usar em meus laboratórios, mas posso compartilhar ola, amigo vc poderia me enviar o software para emular os dongle A,B,C,D,E?
Reginaldo Gonçalves Posted October 13, 2024 Report Posted October 13, 2024 1 minute ago, Reginaldo Gonçalves said: ola, amigo vc poderia me enviar o software para emular os dongle A,B,C,D,E? meu email é reginaldo.agoncalves@gmail.com
Minilab service Posted October 13, 2024 Report Posted October 13, 2024 Nesuprantu klausimo. Jei nori atsakymo rašyk suprantama kalba - Angliškai.
NORVIXOXO JULIUS KWABLA Posted March 30, 2025 Report Posted March 30, 2025 Hi, how can I get Capacity Booster to install on qss 3502 minilab. Thanks in advance.
NORVIXOXO JULIUS KWABLA Posted March 30, 2025 Report Posted March 30, 2025 Hi, how can I get Capacity Booster to install on qss 3502 minilab. Thanks in advance.
Minilab service Posted March 30, 2025 Report Posted March 30, 2025 What do you need - virtual capacity booster type D, or capacity booster type D software? They both are for QSS3502 ( not PLUS ) . Can't use them on QSS3501 , or QSS3502 PLUS ( LP7200 ) . Usually capacity booster type D is dongle connected to minilab computer LPT. If dongle is not there then can be installed virtual booster. Capacity booster type D software need to install with real dongle and with virtual.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now