Change The Main Paper

[purnomosetiawan]

I am using 3501 with all fuji papers and chemichal. Until today i use fuji 5" glossy as main paper, i want to change the main paper to fuji 5" lustre, because fuji 5"glossy is rarely available. Should i do paper spec again and waste papers for paper reg, or i just do emultion change set up for 5".FYI after this i dont use 5" glossy anymore. Thanks for the help.

[purnomosetiawan]

Still need advice

[Minilab service]

Without paper registration your minilab will not allow to make daily setup. When you try to make daily setup then you have wrong magazine error.

If you change paper type in specification menu then should make paper specification setup, because have specification registration not completed error.

The same brand papers quite similar, so if you will not use 5"glossy then can just change 5"luster magazine switches to 5"glossy settings. After that can make emulsion change. If have big corrections have to make emulsion change for all other papers, so might be have waist paper. Also do not forget that you have use 5"glossy print channels to make  5"luster prints.

[purnomosetiawan]

Yes that what i think, i will use lustre paper on glossy channel