Noritsu S3 Film Scanner Software And Setup

[pcs9518]

Hello does anyone have the software and install instructions for a Noritsu S3 film scanner?

Thanks in advance

[Minilab service]

I have software and manuals. S3 can be installed on some minilab or with stand alone workstation. 

If you are talking about adjustments then should be don swing and tilt adjustment, focus adjustment, CCD calibration, light source registration, light source update for scanner and many settings for all carriers you are going to use. To do some adjustments you should have charts ( for each carrier ) , so if do not have or can't get you will not be able do all adjustments.

[kodak_service]

You can not do difficult adjustments of the scanner if you have the diskette "Initial Data" from this scanner.