pepe21 Posted June 12, 2014 Report Posted June 12, 2014 has anyone encountered this dilema of not having either the initial data for the DL410/430 or printhead data and if you need it what do you guys do?
Aaron_RIMG_TSR Posted June 12, 2014 Report Posted June 12, 2014 In the past we were (sometimes) able to get them from Fuji USA. There are no backups on site either? They can be used as the initial data.
pepe21 Posted June 12, 2014 Author Report Posted June 12, 2014 No backups at all..and I need the initial data..I found a original one but different S/N and could not load.
Aaron_RIMG_TSR Posted June 12, 2014 Report Posted June 12, 2014 Do you have a jig to re calibrate the printer? If so you might be able to change the file names on the CD you have, load that data, then create new data using the jig.
pepe21 Posted June 12, 2014 Author Report Posted June 12, 2014 When you say jig you refer to? and I have tried changing the file name and serial and all...and still nothing..I have even tried a HEX editor...theres somethign that I am missing...someone said that there's a workaround software.
Aaron_RIMG_TSR Posted June 16, 2014 Report Posted June 16, 2014 Haven't heard of one... I'll look into it.
baya933 Posted July 8, 2014 Report Posted July 8, 2014 Thank you. hi pepe21, if you can't do it, send me the file and your serial number and i change for you, is easy for me, i do the crack to use ez-controller with out dongle, ctsl software to use in any terminal, capacity booster A, B and C, so this change is easy, o do maybe 4 time to some friends so if i can help you is your call
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now