Dks 1500 Error "Motor Speed Rack"

[ISLAND PRINT]

Our DKS 1500 report error in chemistry "motor speed rack" in a discontinous manner. We ask for help, thank you.

[ISLAND PRINT]

Hi! Attach file monitor. Help!

Edited June 19, 2014 by ISLAND PRINT

[Studio01]

When I had my DKS 1510 I had sometimes this problem, not very often. Restarting the system or DKS software

use to solve the problem and perhaps only happened  once a month.

If your problem is produced often perhaps is caused by motor. (I had to change it too after 10 years)

 

Studio01

[ISLAND PRINT]

Ciao Studio01. Grazie per il consiglio, ora proviamo a sostituire il motore (anche il nostro minilab ha 10 anni).

[ISLAND PRINT]

Good evening. Anyone can sell the motor rack for DKS 1510 part list n. 060 929 085 D?

Thank you very much

motore rack.pdf

[Lankey]

Hi, before replacing I would suggest checking all racks to make sure they free to rotate first and that relevant parts are lightly greased i.e. the cogs etc on the rotating drive shaft in the transmission box.

 would then try replacing the brushes in the motor if desperate.

[ISLAND PRINT]

Hi, Lankey. Replaced motor brushes: all ok! Thank very much

[davidlam]

ISLAND PRINT,

where do you find the correct size carbon brushes to replace to fix the motor problem ?

[Lankey]

i managed to find some at a local tool sales place which were slightly too big and then gently filed down to size.

If time permits I dare say someone like rs components.

Have to make sure that the armiture is cleaned etc before reassembly (can be a bit fiddley so need patience ohh and a torx driver - can't remember the size to get into the motor)

[relaxia]

grats but look for the motor anyway - It will not work for next 10 years, I'm pretty sure of that. 

[davidlam]

Good job !!  anyway

[panzer]

Motor + pulley + sensor + belt + holder plate , all in one , in full working order , available here :

 

Kis Dks Photo Minilab
 

Edited July 27, 2014 by panzer