komodo Posted July 10, 2014 Report Posted July 10, 2014 hi, why my LP5700 always show … warming up… and never show me Stand by after warming thx
photothaibaoui Posted July 10, 2014 Report Posted July 10, 2014 first try to adjust the temperature to 30 degrees p1 p2 and ps.'re playing the machines that stand by.
komodo Posted July 11, 2014 Author Report Posted July 11, 2014 no the temperature adjustment is working fine.. the LP warming up and working well.. but i have always warming up message in LCD of printer..
nanotron Posted July 26, 2014 Report Posted July 26, 2014 hi the temperature can be completed but the ok want come for some reason 1; due to circulation pump malfunction you can check this by making sure that the températures on the warming up screen after completion do not move up or down 2; remove the front processor cover and toutch the pumps and feal if they are running 3; if you get the message evaporation correction at start dont toutch and let run till the températures get ok good luck and feel free to ask every question thank
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now