Qss 3211 Error #6822-0008 And #6900-0800

[dpa_photo]

I am getting the following errors during daily setup and I am not able to print at all.  Any insight of this problem will be greatly appreciated.

 

Error #6822-0008
Image Processing PCB Error
Image Data Operation Error
Default Troubleshooting info at bottom: (If Error recurs contact us or place of purchase)


Error #6900-0800
Main Control System Error
Default Troubleshooting info at bottom: (If Error recurs contact us or place of purchase)
 

Thank you in advance.

[PHOTOLABPART.COM]

No. 6087-0003 Laser Control PCB system error. occurs while printing. Then No. 6900-0800

Main control system error. and 6822-0008 Image Processing PCB Image data operation

error. occur.

The printing operation does not proceed from exposing.

 

CHECK CONNECTORS J/P1513 Connects to the image

processing PCB (LVDS).

 

FOR MORE INFO EMAIL PLEASE minilabtechn@gmail.com

 

Thanks 

 

Regards 

[yustas]

I guess you have a problem with LVDS cable.

Check it please first of all..

 

And then perform the Software Upgrade (HD).

Edited September 3, 2014 by yustas

[dpa_photo]

Just to complete the status of the resolution of the stated problem for future reference, the problem is the image correction PCB which caused blank prints.  After replacing the image correction PCB, operation is back to normal.