Need S1-Ii And S4 Scanner Service Manual

[Forestyl]

I great you all. I need you helping me to get S1-II and S4 scanners service manuals.

Thanks so much.

[Minilab service]

The same manual for all Noritsu scanners - S2, S3, S4 and SI-II. Files ENSCANNERSER_1.pdf ( manual ) and ENSCANNERSEQ_1.pdf ( diagrams ) .

[Forestyl]

Oh Thanks once for your concern. I got from a friend. But how can I get Drivers (Win XP or Win 7) for A scanner LS-600, So I can use it as standalone scanner?

[diegodm]

Hi! where could I find the manual? Thanks

[diegodm]

The same manual for all Noritsu scanners - S2, S3, S4 and SI-II. Files ENSCANNERSER_1.pdf ( manual ) and ENSCANNERSEQ_1.pdf ( diagrams ) .

 

Hi Minilab Service! you were right long time ago with a CCD faulty card with my noritsu HS-1800... it's the J391173 or J391249. I have replaced it and after 6 months of use the new board has failed, and it does not read the green channel... Old board did have a problem in the green channel also, causing banding...

 

Do you know if this may be coming from another board? I mean two times a problem with the same board, and two times the green channel.

 

I was looking to see if the S2, S3 or S4 use the same CCD board, to see options to get one. Best, Diego.

[davidlam]

From S2, S3 and S4 parts list, I can only see all 3 different part nos. for their common names of "LED light source main body unit "

 

S2    Z024050-01 

S3    Z024051-01

S4    Z023548-01                 Not sure any of them are common parts although differences in part nos.

 

Good Day !