2611 Negativ Film Print - Problem

[Chero]

Hello friends!

 

I have problem with printing pictures from negative film, pictures a too black (exposure time is long). (Dihronic filter slowly work)

No errors-

 

I clean completely lamphouse section and dihronic filter sliders, clean zoom lens.

 

I change reflector lamp and make setings and its OK (picture 1)

https://drive.google.com/file/d/0B-cKjmOYpKc6N21MSzM1blk5ZlE/view?usp=sharing

 

I try Emulsion number change and test is OK (picture 2)

https://drive.google.com/file/d/0B-cKjmOYpKc6M0FRa2xMc0xrVlU/view?usp=sharing

 

But when printing from 35mm negative on 135 ANM picture are dark (picture 3)

https://drive.google.com/file/d/0B-cKjmOYpKc6bVdIYUp2VFRCTU0/view?usp=sharing

 

I try put value of Density before printing to “A” (density value -1.-2, -3, -4……-9, A, B, C, D, E) (picture 4)

https://drive.google.com/file/d/0B-cKjmOYpKc6U2FhVlVjZVVubW8/view?usp=sharing

 

 

 

Any good idea that I can use to fix the problem…. Thanks!

[Dave S]

Yes go into CH00 and -5.0D press Shift 1 then yes to register the correction.

Repeat if necessary.

[Chero]

Thanks Dave!! Problem solved! Im needed 4 x -5.0 Densiti it would be good. Dave you are the King