Frontier 570 Software Needed In Full For 2 Pcs

[ramsey]

I just got 2 new pc for the 570 LP and need to install it on .. the computers have fresh windows 7 32bit

 

i called fuji and they asked for alot of money .. im trying to do it my self cause i have computer background and as I read .. the 2 computers are connected as network with IP ... 

 

I know they call the software wired names like S2 .. MS .. and so on .. please try to explain to me is very simple way without any codes cause I dont know anything about it .. all I know that I want to install a software for the main computer to print from ... and install software on  the other computer ( manager ) to receive orders that is connected to the printer direct

 

thank you so much

[Minilab service]

All your questions already answered, so can't understand why to ask the same. As told before S2, MS01 and all other are software names. If our offer is not good can buy from Fuji. You expected to get something better, when called the same.

There are three software types. One computer is FMPC. There can be installed D20 ( first type ) , S9 ( second type ) and MS01 ( third type - versions 3.1 or 4.2 ) . Second computer is printing service. There can be installed C4/C5, S2 or MS01 server.

If on FMPC installed D20 or MS01 can install L1 ( long print - 640 mm printing software for 570 ) .

On server additionally can install many optional software. These software depends which software type you choose.

To install minilab you should have backup. Otherwise you have to make all minilab settings yourself and it is quite hard job.

As I told before have all software - main and optional. 

[yustas]

Try to find the person who can install all software and have experience in it (better to search for free-lancers -thye do not ask too much)...

Sometimes you HAVE to pay money or It may happen that you will have absolutely dead lab due to your "money-save" mood.
 

[Christina Rose]

you have to make sure which software is going to be used with machine like FE, MS01 etc...Again need to arrange those softwares. As far as my experience, its not so easy task just like installing MS office. So better  check with local engineers those who carry out minilab software installations.