Danijel Kovacic Posted April 29, 2015 Report Posted April 29, 2015 I send 4 10x15 pictures to print and after printing I get 4 white papers out with one blue line on side. Also when I send a test paper to do a correction I got all white. This problems happens on bigger formats too. Is it a laser problem or something else? If anyone know's anything about that problem please help
yustas Posted April 29, 2015 Report Posted April 29, 2015 Looks like your AOM driver is defective. Swap it with the next and see the result. And it would be reasonable to place here all printscreens to understand the lasers condition. In your case (FF350) :45D 45E 45G 45F 45K(all history)
Danijel Kovacic Posted April 29, 2015 Author Report Posted April 29, 2015 Can you explain in more detail what is that AOM driver? Other problem is that i cant send more then 1 or 2 pictures beacuse it just stop printing and says indentified error
yustas Posted April 29, 2015 Report Posted April 29, 2015 Read more here: I have placed it for free access long time ago... http://minilablaser.com/manuals/Frontier_Print_Quality_Problems.pdf BTW:What error do you have exactly? There is a few probable causes exists for your problem (blank sheets).
Danijel Kovacic Posted April 30, 2015 Author Report Posted April 30, 2015 I will write example. I can sometimes send 20 picutres (10x15cm) for print and sometimes I can't send more then 2 because the printing stops and then I need to take paper out of printer. Main problem is I think in transport section 5 where the small weels are.
nash Posted April 30, 2015 Report Posted April 30, 2015 turn off the distribution section and then see what happens
Danijel Kovacic Posted April 30, 2015 Author Report Posted April 30, 2015 I found a problem in that pdf file that you have posted. Problem is image abnormality - trailing end white background streaks ED049 In the event of any of the following print image abnormalities, adjust or replace the steel belt (small) (P/L 2nd ed. LP10-86) in the sub-scanning unit. Cause Slippage of the feed roller drive steel belt (small) (P/L 2nd ed. LP10-86) in the sub-scanning unit occurs due to rubbing against the guide plate, thereby causing abnormal feeding of the paper. So the problem is that belt. Is it possible to replace it by myself or I need to call fuji to send me personal staff to do it. How much cost that steel belt II posted a picture so you can confirme if that is correct belt that I found in book
yustas Posted April 30, 2015 Report Posted April 30, 2015 I do sorry to inform you but the belt has been discontinued. Please search it among persons who sell parts from dead FR350/370/390.
yustas Posted April 30, 2015 Report Posted April 30, 2015 I found a problem in that pdf file that you have posted. And more... Does it mean that you "thank me"? If you found the cause of the issue due to my advice is it difficult to write one word "thank you, sir" ?... "O tempora o mores" © Cicero..
Danijel Kovacic Posted April 30, 2015 Author Report Posted April 30, 2015 Yeah thank you for your help
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now