X-4299 Error Sp3000

[Alena Vinokurova]

Hello, 

I have the scanner sp3000 with recovered toshiba computer, when i start system in stand alone mode i have the x-4299 error (image

 http://photogora.ru/brand/savage/Savage-background-paper-2-7x11-m-Tv-Gray-61-12/)

i don't know what to do and i did't find the topic with this problem, please help

[Alena Vinokurova]

problem fixed

[Fototech]

How?

[Minilab service]

They fixed very easy - wrote p.m. to engineer, who knows how to run SP-3000 and all problems where solved. 

Problem - where wrong settings in the system. They used FDIA ( A1 and C4/C5 - latest versions ) .

[Fototech]

Ok I get similar problem on Frontier 370 when I try to upgrade Printer software to ver 7.7. I had to revert to earlier version & the printer is working fine. I wondered whether the problem is the CD that I am using or the CTL Chip?

[edias]

Hi Minilab service!

I have the same error with the toshiba of an SP3000 after a new software install, could you please tell me what settings were changed?

Thanks a lot!!

Edgar

[edias]

On 10/09/2016 at 11:36 PM, Minilab service said:

They fixed very easy - wrote p.m. to engineer, who knows how to run SP-3000 and all problems where solved. 

Problem - where wrong settings in the system. They used FDIA ( A1 and C4/C5 - latest versions ) .

Hi Minilab service!

I have the same error with the toshiba of an SP3000 after a new software install, could you please tell me what settings were changed?

Thanks a lot!!

Edgar

 

 

[Minilab service]

Do not remember. It was long time ago. They wrote few messages to me and all where fixed. Messages already deleted, so do not know what was wrong there.