Frontier 550/570

[nicksimoneau]

I have some scratches on my picture. We have change the P1,P2, PS1-2-3-4 and clean all the rack and the problem persist.

http://i.imgur.com/O5rBZSZ.jpg

Edited September 8, 2016 by nicksimoneau

[purnomosetiawan]

I have some scratches on my picture. We have change the P1,P2, PS1-2-3-4 and clean all the rack and the problem persist.

http://i.imgur.com/O5rBZSZ.jpg

 

something on the roller or crossover scartch the paper. try to clean it all

[Trev Taylor]

Put a bit of paper to fool the printer that the processor cover is on.

Run the processor section in the processor IO checks

Put paper in P1, have a look for the line, then P2, PS1 and so on.

So you can rule out the racks.

[Mr meeseeks]

Hey. I have a 570,can I just ask if I would have to remove the crossover racks when doing this?

I'm getting the same yellowish Scratches, on most but not every print. I've washed all the racks +crossovers and every little roller I could find in the machine. 

Would turning the distribution off allow me to print with the scratches off for now?