Dks3 Prints Have A Bluish Greenish Overall Hue

[NortSur]

Hello, I'm enclosing a print where you can see that prints have an overall bluish greenish hue or stain , specially noticeable on the white part of the print. This are the things that I've done so far:

1- Changed twice the developer

2- Processed unexposed paper, print comes out totally white

3- Processed fogged  paper, print comes out totally black (there I could tell that chems are ok)

4- Tried different paper responses to no avail

5- Did system back up and system restore and nothing

 

Please any advice will be very welcome, 

 

Thanks!!

 

[NortSur]

I forgot to mention that the paper is fresh and happens both on 6" and 5" Fuji brand.

[purnomosetiawan]

leaking LED from some PCB maybe ?

Edited September 21, 2016 by purnomosetiawan

[NortSur]

Good point, unfortunately there are no PCBs inside the printer housing. Also to mention something very important, the more density I apply to the print the more tint the print shows, it seems that its related to the intensity of the LED power. 

 

Thanks!!

[German Tirado Montoya]

-dust over the lens deny pass trhu the ligh from the llcd

-there because of movement of the torrent unfortunatelly rotate a little the polarized filter 

-faulty llcd

-flicker adjustment (based on the lines over the gray area)

[NortSur]

Thanks German, can you explain more on your second Item? Torrent Rotate?

 

Thanks!!

[adamwooo]

maybe poor bleach

[relaxia]

Did you manipulate with lens ?? when focus is not right - sharpness - photos can have green hue... 

[NortSur]

Thanks guys. Fixed!! It was an unfortunate shift of the polarizer filter.