Frontier 340 Auto shutdown

[Jesse Chan]

Hi Guys,

My frontier 340 automatically shutdown few times today, anyone have any idea what's wrong?

 

Thank you

[Nilmit]

dear jesse,

yes, i think this is because of your computer power supply, sometimes it got auto shutdown and complete machine got off,

please try to replce the pc power supply,

thanks

nilesh

[Jesse Chan]

On 1/3/2017 at 4:29 PM, Nilmit said:

dear jesse,

yes, i think this is because of your computer power supply, sometimes it got auto shutdown and complete machine got off,

please try to replce the pc power supply,

thanks

nilesh

Hi Nilmit, 

Bought a normal power supply , but there is afew less wire.... please help.

[Minilab service]

How minilab shutdown -immediately ( worked and image on monitor disappeared ) or you see that computer shutdown normally ( W2K closed and only then power off ) . If first case - problem inside computer ( power supply, motherboard ) or missing power supply from minilab ( 110 V !!! ) . When you buy power supply check that it can work at this voltage ( from 110V what is computer power supply inside minilab to 240 V if decide connect computer for tests to wall socket ) . What wires missing on your new power supply? I used  normal power supply on these computers and all where OK there. If you have second case then will be some problem with computer remote control circuit. Might be you have problem with wires, bad contact, or problem with processor pcb. This board makes computer remote control - power  ON and shutdown through Windows using Fuji software plug-in.

Edited February 3, 2017 by Minilab service

[cokwax]

On 1/16/2017 at 6:11 PM, Jesse Chan said:

Bought a normal power supply , but there is afew less wire.... please help.

Minilab PCs have special power supplies. What do you mean ...bought a normal power supply...?

[Minilab service]

Hello. I used normal power supply on Fuji 340. Yes, there special power supply there 110 - 240 V , with UPS. UPS option not used there - even battery is not connected. To computer 7011 motherboard (Ricoh FB6) from power supply two connectors - 20 pin and 4 pin. I found regular computer power supply with 110 - 240 V input voltage and without UPS.

[Roby]

 

 

Ciao, ieri mattina ho tirato fuori il PC e soffiato tutto correttamente, alimentatore, ventola e spray per i contatti, acceso senza il minilab collegato tutta la mattina nessun problema poi nel pomeriggio collegato al minilab è iniziato senza problemi ma dopo 2 ore improvvisamente spento di nuovo ho provato a riaccenderlo immediatamente ma il mio PC emette un segnale acustico con 2 segnali acustici e non si avvia