number of print limit exceed. while turning off message appears - MIXING SOLUTION PLEASE WAIT.

[Ram Shrestha]

mixing solution please wait, when i put water in repl tank manually level in ok and gradually level lowers. as i put water in repl tank the pump p2RA and p2RB starts and adds repl to main tank continuously automatically. i loaded new cartride in cartridge chamber but the machine shows no response. machine is fuji 340E. please help if any ideas

Edited January 18, 2017 by Ram Shrestha

[waltersfoto]

Check the level sensors for p2ra/p2rb. maybe they are jammed (does not float).

In the service manual (15-2) They are refered as FS408, FS409,FS412, FS413.

[pepe21]

You have to do a manual mix

[axxa2009]

hi  i had the same problem with a 375 the pumps seems ok  and the level sensor looks ok. the cathide down ok and empty what can I do to solve this peoblem I want to change to RA take out the tanks and do the replisment manually. I seeit in other minilabs but Im not sure how to do this Any  one nows how to do this change ??