problem with lenses DKS1710

[sapsi]

I changed the belt from lens turet and there are problems with exposure. It is to much difference betweeen picture exposed with LCD on 90 degrees and LCD on normal. With LCD normal, the image has 1.5 cm white border on top and i dont know how to modify parametres to have equal WB at both LCD position.

[pskaro]

You need to do few tests, but for some (like Zero Adjustment, the top cover have to be open to mechanically adjust best sensor zero position) and some understanding what you are doing, maybe the best is to leave it for the technitian, but..

1. Zero Adjustment Go to SU/Settings/Zero Captors + LED

2.Lens and LCD offsets adjustment: GO to tab SU/Settings//OPTICAL/OFFSETS/START

3. Optical centering: Go to SU\Centring\Lens

4.Centering setting: Go to SU/Centring (fine tune on the end, can be skipped if the top 3 solved the problem)

 

[sapsi]

Thanks Pskaro, i solved with SU\centering\Lens.

I'm afraid to do "Zero Adjustment" 

 

[Xeorn]

I had repaired lenses for a DKS 1710. Not the cheapest repair i`ve done so far