Qss3501 Ver8 - Problem

[Prathan]

 

Ask for advice  Qss3501.

I have problems While doing "Emulsion Number Change"(Only 8 inch paper)

Have Error / attention "Error has occurred in the printer section. (Error No.6017-0003)

If I print all sizes Will work normally.

 

 

[Dave S]

Try removing the C.V.P (Backprinter) unit and see if it stops it jamming.

If it does stop the jamming, the C.V.P unit will be too close to the paper and will need to adjusted.

[Prathan]

Thank you Dave s

I have removed the C.V.P unit.  But still the same problem.

[Dave S]

Check the unit is attached properly to the runners, it's just hooked on.

You will need to make a print with the door open (put magnet on sensor) and try and see what's happening.