[ERROR] LED Light Source temperature is being adjusted.

[dailysetup]

Hi I've recently installed an S4 scanner on the 3502. Replacing my S3.

I saved the S4's Carrier and Scanner service data from the previous machine and loaded it onto the 3502 new machine.

When I go to update the light source, it gives me the error:

No. 1315-0001
LED Light Source temperature is being 
adjusted.  process cannot be continued.

I checked the temp and it is stable at 44C.

I checked the cooling fans and they are operational.

I checked the scanner filter and it is clean.


Is there something I am missing?

Thanks

[kodak_service]

You shall upgrade the software to version 4.01 or later..

[dailysetup]

3 hours ago, kodak_service said:

You shall upgrade the software to version 4.01 or later..

Do you mean the Noritsu Software? I'm running version 12

[Minilab service]

Go to service mode, maintenance, software upgrade, software upgrade from HD. There choose software upgrade for scanner and carrier.

[dailysetup]

Great thanks, this worked.