blue spot

[kheus]

Hi 

I have blue spots on picture all qss2901 I change image processing and correction but problem still 

Thanks for help 

[kheus]

[Dave S]

What does the emulsion test print look like?

Check the chemistry is good.

[kheus]

All test OK . emilulsion and paper specification

Thanks 

[Dave S]

Is this happening on all widths of paper?  Or is it only on one magazine?

Please upload a scanned image of the emulsion test print from the paper magazine you used to make the above print.

Also take a screen shot of the colorimeter readings when you do the daily setup.

[kheus]

Sorry dear but upload not work now but same for all magazine 

[nanotron]

Hi 

Please check your colorimeter and adjust it feeding position then check and make sure that the calibration plate is clean

Then do initial setup and everything must come back normal. but before check your lamp and clean the filters.

Good luck

 

[kheus]

I solve it 

Thanks all 

[Dave S]

15 hours ago, kheus said:

I solve it 

Thanks all 

That's great news!

For the benefit of others reading this post, can you explain how you solved it?

[davidlam]

Kheus, how is the problem solved ?

[kheus]

Hi 

I change mlva card .