Agfa D2 Paper jams in Imaging area

[erussell65]

I have an Agfa Dlab 2 that has been getting jams in the areas prior to the processor. Mainly they are in the left side area where the belt assembly is. It only happens with 12 and 8 inch papers when the rolls are down to around 25 meters. Any ideas on what the fix is for this?

Thank you.

[Ignatius]

Did you fix this?

[majedyounso]

if problem is appear in the end of roll this from roll paper

you can warp it reverse in the dark room then warp it normal as it and return it to magazine

best regards