EZ Controller service menu password?

[35mmDSLR]

Does anyone know what it is?  I'm using version 6.7 (latest) on Windows 10.

I tried the scanner service menu password of 2260 like when you adjust focus but obviously that doesn't work in EZ's service menu or I wouldn't be asking.

Thanks!

[Minilab service]

Yes, password 2260. To make EZ controller adjustments have to enter it on Ez controller. If you want make adjustments on scanner system software then doesn't matter where to enter it - can do it on Ez controller or scanner system software. You didn't tell your scanner model. To enter password have enter menu ( on EZ controller or system software ) . Then press F1 and F9 on big keyboard ( F and -1 on small Noritsu keyboard, if have it ) . On pop up box enter 2260 and press enter. Focus adjustments will find on scanner system software ( not on EZ controller ) . To adjust focus you need focus adjustment charts for each carrier ( 135, 240, 120, mounted slides ) .

Edited October 17, 2017 by Minilab service

[35mmDSLR]

45 minutes ago, Minilab service said:

Yes, password 2260. To make EZ controller adjustments have to enter it on Ez controller. If you want make adjustments on scanner system software then doesn't matter where to enter it - can do it on Ez controller or scanner system software. You didn't tell your scanner model. To enter password have enter menu ( on EZ controller or system software ) . Then press F1 and F9 on big keyboard ( F and -1 on small Noritsu keyboard, if have it ) . On pop up box enter 2260 and press enter. Focus adjustments will find on scanner system software ( not on EZ controller ) . To adjust focus you need focus adjustment charts for each carrier ( 135, 240, 120, mounted slides ) .

2260 does not work to access the EZ Controller Service Menu (click F then F1 - F9 in EZ Controller).   2260 works great for the Scanner service menu by pressing F1-F9 to adjust focus but that's a completely different piece of software and not what I'm trying to accomplish.

I'm trying to edit the scan resolutions in EZ Controller.

Edited October 17, 2017 by 35mmDSLR

[Minilab service]

It works. Right now tested on my laptop, where have installed Windows 7. Just from main window click button to open menu ( do not go forward !!! ) . Then press F1 and F9 and enter 2260. This way will be enabled service mode on EZ controller and scanner system software.

Scan resolution can edit without password. Can do it in print channel. There can set resolution and scanning method. 

With password additionally can see all EZ controller menu. Additional options are displayed in blue color. For example can make EZ controller specification settings, read - write custom date ( without password can read - write all date only ) , can do EZ controller data initialization and few other settings. 

[35mmDSLR]

56 minutes ago, Minilab service said:

It works. Right now tested on my laptop, where have installed Windows 7. Just from main window click button to open menu ( do not go forward !!! ) . Then press F1 and F9 and enter 2260. This way will be enabled service mode on EZ controller and scanner system software.

Scan resolution can edit without password. Can do it in print channel. There can set resolution and scanning method. 

With password additionally can see all EZ controller menu. Additional options are displayed in blue color. For example can make EZ controller specification settings, read - write custom date ( without password can read - write all date only ) , can do EZ controller data initialization and few other settings. 

Maybe an older version.  I'm on EZ 6.7 on Windows 10.   2260 does nothing, no additional menus.  

[Minilab service]

Before I had to install EZ controller on W10 x64 ( version 6.60 ) . There service mode worked. Just small difference between 6.60 and 6.70 ( small improvement for one dry printer ) , so there should work also.

Maybe you have installed Twain driver ( not EZ controller ) ? My is full EZ controller.

[35mmDSLR]

Just now, Minilab service said:

Before I had to install EZ controller on W10 x64 ( version 6.60 ) . There service mode worked. Just small difference between 6.60 and 6.70 ( small improvement for one dry printer ) , so there should work also.

Maybe you have installed Twain driver ( not EZ controller ) ? My is full EZ controller.

I'm full EZ 6.7 with dongle and every add on Noritsu has to offer.   

[Minilab service]

On my computer all versions can work without dongle. All options installed also. It is very curios why you can't access service mode. If you want can test your version on my computer. Can upload your version on files.fm and send link on private message. Also can try access service mode on your computer - just it should be connected to Internet and have Teamviewer. On all versions service mode worked - should work on this also.

[Minilab service]

35mmDSLR, if you are so smart guy then in the future do not ask any questions. All your messages will be ignored. Nobody here will not tell factory mode password, which you demand to tell me on private message. It is secret information and is not on Noritsu public documents.