alex800 Posted January 23, 2018 Report Posted January 23, 2018 I would like some information about the agfa d lab 1 LED, who can calibrate it? or if you can help with buying a used LED, a distributor or a particular vendor, or a technician, I would appreciate
Ignatius Posted February 13, 2018 Report Posted February 13, 2018 What is the problem, error messages etc?
alex800 Posted February 13, 2018 Author Report Posted February 13, 2018 I dont have an error ! that is strage, my exposed area is red without any picture. Thanks
Ignatius Posted February 13, 2018 Report Posted February 13, 2018 Have you checked the Graphix card on the IPU, Fan as well as onboard graphix fan on IPU MB depends which MB you have. Was it exposing ok before this?
alex800 Posted February 13, 2018 Author Report Posted February 13, 2018 yes , I have Check Video card, Chemicals, EC Board and yes I have work 10 years on my D lab 1
Ignatius Posted February 21, 2018 Report Posted February 21, 2018 Can you do a MBL? Or no printing at all? Then you have a problem with the print engine. I have spare parts available send me a pm.
alex800 Posted February 21, 2018 Author Report Posted February 21, 2018 No I can’t:( can we speak by email ? cta.alex@gmail.com thanks
majedyounso Posted March 8, 2018 Report Posted March 8, 2018 this problem is from data of your software try to calibrate PBL and MBL by loging in service it will work best regards frisky2good 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now