FUJI DL600 service software needed!

[PaktMinilabs]

We are looking for service software for service maintanance, it is used to connect to DryLab in different way than normal maintanance mode from MS Software. It should be separate software to connect in service mode without making PREOPERATION. If you have it please let me know at: minilabs@wp.pl

 

We need also materials INKS and PAPER for that DRYLABS but only ORYGINAL FUJIFILM

[yustas]

I think you remember that DX100  is the same with EPSON SL-D700 but under the different system software.

[PaktMinilabs]

Yes we know both systems DX100 and D700, but that software we have. We need this kind of service tool do DL600 it is the same as Epson D3000 

[nick2898]

On 3/28/2018 at 11:10 AM, PaktMinilabs said:

We are looking for service software for service maintanance, it is used to connect to DryLab in different way than normal maintanance mode from MS Software. It should be separate software to connect in service mode without making PREOPERATION. If you have it please let me know at: minilabs@wp.pl

 

We need also materials INKS and PAPER for that DRYLABS but only ORYGINAL FUJIFILM

FOR DL600 NO NEED OF DIFFERENT SERVICE SOFTWARE....THE SERVICE SOFTWARE IS IN ITS MAINTENANCE SOFTWRARE..IF YOU WAN TO KNOW INBOX ME 

[jishar]

On 4/30/2019 at 9:50 PM, Minilab service said:

There are not any service software for Fuji DL-600 , DL-650 and Epson SL-D3000. There all adjustments can make from maintenance utility, or recovery utility. Both utilities installed with system software. How to make adjustments can find on service manuals ( DL-600, DL-650 and SL-D3000 ) . Have service manuals for all these models.

There are service software for Fuji DX-100 ( Frontier-S ) and for SL-D700. For Fuji DX-100 have DX100 service programs version 1.2.0 , 1.3.2 , 1.6.0 , 1.7.0 and for Epson - version 1.6.0 . Have service manual also.

Write private message, if need something.

My fuji dx100 does not turn on can you please help

[Minilab service]

If printer doesn't turn on at all then problem is with power suppliers. First check there. Look service manual how they are connected.

[copyright-protection]

Dear forum members,
I highly recommend stopping the distribution of the software, which is a gross violation of ownership of the software that belongs to Fujifilm Co.Ltd.
You illegally duplicate and sell copyrighted software without the copy owner's permission.
Even just purchasing the software can result in a fine.

[vishal patel]

hii

i want to repair our dl 600 fujfilm dry mini lab fronter 

any idea who dose repair  or u know any one plzz 

help me out 

thnaxx

•  
• Quote

[nick2898]

hey vishal ,

I can help you in this …first of all what’s the issues with the machine ?

[spirosnik]

On 11/23/2022 at 2:19 PM, nick2898 said:

hey vishal ,

I can help you in this …first of all what’s the issues with the machine ?

Hello i bought a dl600 and I'm trying fixing the mcu board

But i also want to clean all the printer

How can i remove the printhead?

Is somewhere any video i can see?

[Minilab service]

Do not think, that you find video. Look at DL600 service manual. There you can find information how to do it.

Here you can see DL600 print head when removed covers :
https://www.youtube.com/watch?v=mwzXlMijnX8

Here DL600 print head :
https://www.youtube.com/watch?v=MybLwXILHWE 
Video name is incorrect. Here can't be DL650 and SL-D3000 print head. They have 6 elements and on video one element is removed. 5 elements have DL600.

On DL600, DL650 and SL-D3000 instead to replace print head unit is possible to change one element, which is not working. Elements can find online, but not from Fuji or Epson. Fuji and Epson sells only print head units ( with 5 elements, or 6 elements ) .

[spirosnik]

Thank you very much i will check it