Jump to content

QSS Noritsu Green Printhead Motor Error 7906


UCPSN

Recommended Posts

  • 1 year later...

07906-0004 - overcurrent was passed to the printhead drive motor when the print head was moved to the left side from the right side of the home position. 
Try to move by hand. Maybe see what disturb. Can be just dirty, ink, some mechanical problem and etc. 
If all OK then try move head into other side. Then see error, or not. 
The same error can cause faulty motor or control circuit,. Before checking them need check all other.

Link to comment
Share on other sites

  • 3 years later...

Hi,

Now we face "error 07906-00008 Printhead drive motor control error 4" on a D1005. EZC version 8.x, seperate RIP PC.

Replaced: linear scale + sensor, I/O pcb, no obstruction visible.

Only this error occurs on Right lane paper in Fual magazine and on 30cm paper in Single magazine.

Left lane paper: no problem at all.

Any idea's ?

Thx.

Printerz

 

Link to comment
Share on other sites

All D1005 printers have RIP computers. Didn't see this model without RIP computers.

07906-00008 means printhead drive motor position detection error occurred when the printhead was moved to the left side from the right side of the home position. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
DL650
DX100