Jump to content

Noritsu V30 - Looking for a service


Recommended Posts

Hi guys,

I'm from Leeds, W yorks and i'm wanting to know if anyone knows of , or can themselves service a Noritsu V30?

The machine is an ex Snappy Snaps processor but has been in good storage facilities for around 5 years. The machine turns on fine, it has been turned on once, and asks for chemicals, but before I spend any money on chemicals i'm wanting to have the machine get a once over / MOT so to speak.

Can anyone help or point me in the right direction please?

Many thanks

Link to comment
Share on other sites


So when turning the circuit breaker on i'm getting an error to input chemicals which sounds the alarm, but when pressing and holding yes and no the alarm doesnt cut out. But when i hold the light button the light goes off so i'm not sure if my keyboard is defected now. 

Also, when actually turning the proper power on, the screen displays motor drive error (40) and there is a clicking coming from the cogs in the top of the machine by the rollers, possibly the cogs are ceased up / slightly crystilized. 

Does anyone have any contacts for somebody to give the machine a service? 

Many thanks in advance.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...