jejes 0 Posted March 11 Report Share Posted March 11 I have ordered from russia and tested, they did not work properly. Where i cant get them? I'm looking for a V30 or V50 film processor. Thank You Quote Link to post Share on other sites
davidlam 25 Posted March 12 Report Share Posted March 12 Which country are you jejes in ? you're looking for v30, v50 film processor . . . .and. . . . what format of focus charts (scanner adjustment chart) you are looking for ? Quote Link to post Share on other sites
Minilab service 258 Posted March 12 Report Share Posted March 12 Charts from Russia are not original. They are printed on film, when real charts are metal with cut off gap. Yes, plastic charts are really bad. It was impossible to make automatic focus adjustment and manual adjusted focus was bad. I reached better focus using standard film, than with these charts. When customer got normal charts I corrected focus values. I di this job online, so couldn't use my charts ( I have full set - for all lanes and carriers ) . Which chart do you need? Original charts really good, but very expensive. The same charts are for older scanners ( since QSS28, QSS29, QSS30 and other ) . Quote Link to post Share on other sites
davidlam 25 Posted March 14 Report Share Posted March 14 here are what they look.. i have 135, 240, 120 and for slide mount too. Thin metal sheet with cut off gaps by Lasercut. They have shinny surface but appear old and awful in below photo Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.