Jump to content

The FUJI FRONTIER 330 machine does not start or stop properly.

Recommended Posts

The FUJI FRONTIER 330 machine does not start or shut down properly. Just the machine is turning on but the machine's computer is not turning on (because the 600 board is not getting a 24 volt).But I left the CTP border jumper open for 5 minutes and after 5 minutes I put on the CTP board jumper and the machine started properly (jumper position 2-3). When the machine shuts down, the computer just shuts down but the machine is running. The machine is shutting down only when the power is turned off. 

If there is any solution, please tell..... Thank you

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...