jejes Posted June 1, 2021 Report Share Posted June 1, 2021 Hello, i live in Canary islands (Spain) i have bought a LS-600 and it has come with broken bosses, i'm not very good with screwdriver and i'm not able to change them. Is there a good guide to change them or could anyone help me with a video call? I have sent twice to the owner and he changed the bosses and again came the scanner with broken bosses.Shipping companies here in spain are not very good. Does anyone live here or plan to come here? Could anyone help me with a video call? Thakn You Quote Link to comment Share on other sites More sharing options...
davidlam Posted June 2, 2021 Report Share Posted June 2, 2021 show us photo(s) or video to show what exactly "broken bosses" you are having . . . so as to avoid misunderstanding. help us help you Quote Link to comment Share on other sites More sharing options...
davidlam Posted June 2, 2021 Report Share Posted June 2, 2021 to me. .. I hate my boss Ha ! Ha ! Quote Link to comment Share on other sites More sharing options...
Minilab service Posted June 2, 2021 Report Share Posted June 2, 2021 Broken bosses is typical problem on LS600 and LS1100. Bosses - plastic holders, which moves on the rod. Bosses are very bad and breaks very easy. Do not understand, why Noritsu didn't solve this problem. Bosses on other rod are unbreakable. How can be that on one rod bosses are very good ( unbreakable ) and on other rod - trash ( often breaks after scanner transporting ) . Quote Link to comment Share on other sites More sharing options...
Dave S Posted June 2, 2021 Report Share Posted June 2, 2021 The rear boss was also easy to break on the S1-II scanner. Noritsu modified the part on the LS-600/ LS-1100 with a much stronger design, shame they didn’t modify the front bushing as well, it’s a very fragile design. A083227-01 Rear Boss Old part A090076-01 Rear Boss New part Quote Link to comment Share on other sites More sharing options...
davidlam Posted June 2, 2021 Report Share Posted June 2, 2021 hi all, from my parts list below .. showing their positions I highlight yellow A090076-01 Boss(1) and A083226-01 Boss(2). @Dave S Sir,,, Are they easy breaking parts ? our team is lucky we have never met the broken so far. Quote Link to comment Share on other sites More sharing options...
Minilab service Posted June 2, 2021 Report Share Posted June 2, 2021 A083226-01 - very breakable. Just drop scanner and you have them broken. A090076-01 - never saw broken. They have absolutely different design and material. Would be very difficult to break them. A083227-01 was used on S1, S1-II and older LS600, LS1100 ( first series ) . They are not as good as A090076-01 . A090076-01 - whole plastic and better material. A083227-01 - plastic with gap ( do not hold on one side ) and bad material ( the same as A083226-01 ) . Noritsu made reliable rear bosses ( A090076-01 instead A083227-01 ) . Do not understand, why they did not the same with front bosses ( A083226-01 ) . Chinese part makers could think about it and make replacements. I'm sure this time replacements would be better, than original. Quote Link to comment Share on other sites More sharing options...
davidlam Posted June 2, 2021 Report Share Posted June 2, 2021 thank you for teaching Quote Link to comment Share on other sites More sharing options...
davidlam Posted June 3, 2021 Report Share Posted June 3, 2021 today Japan replied that A083227-01 had been discontinued and has NO REPLACEMENT part no.... while easy-breaking A083226-01 STILL ON STOCK in Japan Quote Link to comment Share on other sites More sharing options...
Minilab service Posted June 3, 2021 Report Share Posted June 3, 2021 Yes A083227-01 had been discontinued. It was used on S1, S1-II and older LS600, LS1100 ( first series ) . It was not very good and sometimes broke. Really it HAS replacement. Replacement is A090076-01 ( on your picture ) . A090076-01 has absolutely different design and material. Would be very difficult to break it. A083226-01 has not replacements. Very easy to break it. Quote Link to comment Share on other sites More sharing options...
jejes Posted June 9, 2021 Author Report Share Posted June 9, 2021 i have a friend who can print 3d and he is printing this pieces. But i need a person who can fly here to help me in person. Thank You Quote Link to comment Share on other sites More sharing options...
davidlam Posted June 9, 2021 Report Share Posted June 9, 2021 I will receive one piece of this ( u$d 8 ) plastic A083226-01 next Monday from Noritsu Japan.... I ordered it to look at it and stock for future. Quote Link to comment Share on other sites More sharing options...
Minilab service Posted June 9, 2021 Report Share Posted June 9, 2021 One piece not enough. Usually need change both bosses ( 2 pieces ) . Quote Link to comment Share on other sites More sharing options...
davidlam Posted June 10, 2021 Report Share Posted June 10, 2021 (edited) well, will see. thanks Edited June 10, 2021 by davidlam Quote Link to comment Share on other sites More sharing options...
davidlam Posted June 11, 2021 Report Share Posted June 11, 2021 i have received this A083226-01 SLIDE BOSS(1) today, see photo . Quote Link to comment Share on other sites More sharing options...
jejes Posted June 11, 2021 Author Report Share Posted June 11, 2021 Yes, it's this piece, but my main problem it's tht i'm not so good with screwdriver and i prefer a person who can do by itself. Shipping the scanner it's not possible because it breaks the replaced bosses. Has anyone the chance to fly to canary islands? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.