Jump to content

LS-600 Broken Bosses - Canary Islands


Recommended Posts

Hello, i live in Canary islands (Spain) i have bought a LS-600 and it has come with broken bosses, i'm not very good with screwdriver and i'm not able to change them. Is there a good guide to change them or could anyone help me with a video call? I have sent twice to the owner and he changed the bosses and again came the scanner with broken bosses.Shipping companies here in spain are not very good.

Does anyone live here or plan to come here? Could anyone help me with a video call?

Thakn You

Link to post
Share on other sites

Broken bosses is typical problem on LS600 and LS1100. Bosses - plastic holders, which moves on the rod. Bosses are very bad and breaks very easy. Do not understand, why Noritsu didn't solve this problem. Bosses on other rod are unbreakable. How can be that on one rod bosses are very good ( unbreakable ) and on other rod - trash ( often breaks after scanner transporting ) . 

Link to post
Share on other sites

The rear boss was also easy to break on the S1-II scanner. Noritsu modified the part on the LS-600/ LS-1100 with a much stronger design, shame they didn’t modify the front bushing as well, it’s a very fragile design.


A083227-01 Rear Boss Old part
A090076-01 Rear Boss New part

 

Link to post
Share on other sites

hi all, from my parts list below .. showing their positions I highlight yellow

 A090076-01  Boss(1)  and  A083226-01 Boss(2).

@Dave S Sir,,, Are they easy breaking parts ?  our team is lucky we have never met the broken so far.boss.thumb.PNG.b2106e41e8a3e9fd4fce6f815c2446cb.PNG

 

boss.thumb.PNG.b2106e41e8a3e9fd4fce6f815c2446cb.PNG

Link to post
Share on other sites

A083226-01 - very breakable. Just drop scanner and you have them broken. 

A090076-01 - never saw broken. They have absolutely different design and material. Would be very difficult to break them.

A083227-01  was used on S1, S1-II and older LS600, LS1100 ( first series ) . They are not as good as A090076-01 . 
A090076-01 - whole plastic and better material. 
A083227-01 - plastic with gap ( do not hold on one side ) and bad material ( the same as A083226-01 ) .

Noritsu made reliable rear bosses ( A090076-01 instead A083227-01 ) . Do not understand, why they did not the same with front bosses ( A083226-01 ) . Chinese part makers could think about it and make replacements. I'm sure this time replacements would be better, than original.

 

Link to post
Share on other sites

Yes A083227-01 had been discontinued. It was used on S1, S1-II and older LS600, LS1100 ( first series ) . It was not very good and sometimes broke.
Really it HAS replacement. Replacement is A090076-01 ( on your picture ) . A090076-01 has absolutely different design and material. Would be very difficult to break it.

A083226-01 has not replacements. Very easy to break it.

Link to post
Share on other sites

Yes, it's this piece, but my main problem it's tht i'm not so good with screwdriver and i prefer a person who can do by itself. Shipping the scanner it's not possible because it breaks the replaced bosses. Has anyone the chance to fly to canary islands?

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...