Ken O Posted June 9, 2021 Report Share Posted June 9, 2021 Please I need help on how to creat a channel for 12x19 on my 3101-1 Noritsu digital machine. Advance? WB Width ? image magnification? Exposure Position correction? Please help. thanks Quote Link to comment Share on other sites More sharing options...
Minilab service Posted June 9, 2021 Report Share Posted June 9, 2021 (edited) Just open print size list. There copy similar print channel and paste on free position. Confirm after that. Open new created channel, rename it ( for example 12 x 19 ) , select paper ( 305 and surface, which you need ) and change paper advance ( length, enter 482.6 mm ) . All other settings are optional. Confirm and you have new channel. WB Width need to enter when you print with borders. If to change Image magnification then image can be smaller than paper ( around picture will be empty ) , or bigger, than paper ( part of picture will not be on paper ) . Exposure Position correction - if necessary can correct exposure start position ( to start earlier, or latter ) . To QSS3101-1 can be connected external new and modern computer with W10 64 bit. There can be installed EZ controller. All digital orders can print from there. Printing process is faster, if compare with old computer, which works on Windows 2000. Edited June 9, 2021 by Minilab service Quote Link to comment Share on other sites More sharing options...
Ken O Posted June 9, 2021 Author Report Share Posted June 9, 2021 Thank you very much Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.