Jump to content

Recommended Posts

Just open print size list. There copy similar print channel and paste on free position. Confirm after that. 

Open new created channel, rename it ( for example 12 x 19 ) , select paper ( 305 and surface, which you need ) and change paper advance ( length, enter  482.6 mm )  . All other settings are optional.  Confirm and you have new channel.

WB Width need to enter when you print with borders.
If to change Image magnification then image can be smaller than paper ( around picture will be empty ) , or bigger, than paper ( part of picture will not be on paper ) .
Exposure Position correction - if necessary can correct exposure start position ( to start earlier, or latter ) .

To QSS3101-1 can be connected external new and modern computer with W10 64 bit. There can be installed EZ controller. All digital orders can print from there. Printing process is faster, if compare with old computer, which works on Windows 2000.

Edited by Minilab service
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...