Jump to content


Recommended Posts

W-2753 means result of concentration measurement is negative. Can be, that  PS4 processing solution concentration really is too high, broken PS3 to PS4 partition blade, faulty sensor (FS421) , or faulty DTL circuit board. 

W-2753 is not error. All messages, which start with W means mismatching of condition. You can continue to print, but if concentration go up you will see error ( E-2753 ) and software will not allow to print.

To solve W-2753 can try on working tanks change STB, check STB replenishment, use correct amount of tablets, check circulation and clean sensor. If even after that have error then faulty sensor, or board .

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...