Jump to content

Fuji DX100, err.1495 how to fix it


Rourke84
 Share

Recommended Posts

Hi i was stuck with this error on Fujifilm DX100, err. n.1495 (Ink Leak Error). If someone has the same issues i fixed it with the service software (leave open the front cover first) going to Adjustments/Maintenance/IES Detection flag ...you can see the text "current:abnormal"....so flag "Before Repairing" and click RUN will change the status in "current:under repair" then flag "completion of repair" and click RUN, it will change the status in "current:normal" and can come back to print normally. I think it's a temporary solution cause 1495 error means the ink leaks from the holder, so you must send to service for replace it as soon as possibile i think

Link to comment
Share on other sites

4 hours ago, nick2898 said:

mostly the ink leakage is from the left catridge compartment …you can chnage it by urself if the spareparts are available in ur area

i have from another broken DX100...i can try to change by myself..i just hope the print head will not get damage...usually it get broken after 2-3 days without printing.

Link to comment
Share on other sites

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...