Isajeer Posted July 14, 2021 Report Share Posted July 14, 2021 How do I change what channel ejects to what tray? Currently its ejecting to the conveyor belt but want the channel to be ejecting to the large tray Quote Link to comment Share on other sites More sharing options...
Dave S Posted July 15, 2021 Report Share Posted July 15, 2021 Which machine model? Quote Link to comment Share on other sites More sharing options...
Isajeer Posted July 16, 2021 Author Report Share Posted July 16, 2021 On 7/15/2021 at 4:07 AM, Dave S said: Which machine model? QSS-3901G Quote Link to comment Share on other sites More sharing options...
Dave S Posted July 17, 2021 Report Share Posted July 17, 2021 All prints larger than 6x9 (152x229mm) should come out of the bottom tray. If the large prints are coming out onto the conveyor, check the sensors inside the dryer rack are clean, check the operation of the divert solenoid and movement of the flap in output check mode. Isajeer 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.