Happyrunner88 Posted August 20, 2021 Report Share Posted August 20, 2021 Hello- I just purchased a Fuji Frontier sp3000, but I'm having a hard time finding information on the electrical wiring such as voltage. Does anyone know how I should set up my electrical? I really appreciate the help. Also, I was wondering if there might be any facebook groups y'all belong to. Thanks, Quote Link to comment Share on other sites More sharing options...
Minilab service Posted August 21, 2021 Report Share Posted August 21, 2021 Hello. If scanner computer ( or computer power supply ) original then can connect to any voltage - from 100V to 240V AC . To connect scanner need wire with standards computer plug. Turn ON breaker and press scanner Power button. Then scanner should start. If doesn't try at the same time press and hold computer power button and scanner power button. If scanner starts only after that then need change computer BIOS settings ( power management ) , On SP3000 can be used FDIA software ( A1 on scanner, C4/C5 on server and optional modules ) , FE software ( S1, S2 and optional ) , or MS01 ( MS11, MS01 and other ) . On server ( second computer ) can be Windows 2000, Windows XP, Windows 7 32 bit, or W10 64 bit. Windows depends on used software. I know everything about SP3000. Write private message, if need some help, or advises. Happyrunner88 1 Quote Link to comment Share on other sites More sharing options...
Happyrunner88 Posted August 22, 2021 Author Report Share Posted August 22, 2021 20 hours ago, Minilab service said: Hello. If scanner computer ( or computer power supply ) original then can connect to any voltage - from 100V to 240V AC . To connect scanner need wire with standards computer plug. Turn ON breaker and press scanner Power button. Then scanner should start. If doesn't try at the same time press and hold computer power button and scanner power button. If scanner starts only after that then need change computer BIOS settings ( power management ) , On SP3000 can be used FDIA software ( A1 on scanner, C4/C5 on server and optional modules ) , FE software ( S1, S2 and optional ) , or MS01 ( MS11, MS01 and other ) . On server ( second computer ) can be Windows 2000, Windows XP, Windows 7 32 bit, or W10 64 bit. Windows depends on used software. I know everything about SP3000. Write private message, if need some help, or advises. Thank you so much for the valuable information, I really appreciate it. I'm sure I'll have a few more questions as I fire the scanner up.. thanks again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.