marco79 Posted September 1, 2021 Report Share Posted September 1, 2021 hi i'm new here and i don't speak english well i have a frontier 340 and i recently changed the laser unit and since then the pictures don't come out the correct white edges on one side of the picture come out small and i haven't been able to correct it, someone will know how fix it. Quote Link to comment Share on other sites More sharing options...
Minilab service Posted September 1, 2021 Report Share Posted September 1, 2021 Make center adjustment, laser beam position rough adjustment and fine adjustment. If all well and just border not the same you can correct on print channel. There can add frame size - for each edge separately. Bigger value - bigger frame. Correction step is 0.1 mm. Can be entered different values. This way you can make edge bigger, or smaller. Quote Link to comment Share on other sites More sharing options...
marco79 Posted September 1, 2021 Author Report Share Posted September 1, 2021 Ok,gracias Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.