Kodjo Taiwo Posted September 2, 2021 Report Share Posted September 2, 2021 I am facing power failure on my 330fuji machine,it on within 30secs it off it's self,on the PAC 22 BOARD,I have changed the fused from PAC 18 FUSE (OFF) to PAC 19(19) ON, it's on,I switched it off ,and when I tried to restart the machine again is not booting up, please what's the issue? Quote Link to comment Share on other sites More sharing options...
Minilab service Posted September 2, 2021 Report Share Posted September 2, 2021 Did after powering off you left jumper on position PAC19 ( ON ) ? Is computer powered? Quote Link to comment Share on other sites More sharing options...
Kodjo Taiwo Posted September 3, 2021 Author Report Share Posted September 3, 2021 (edited) Yes,I left the jumper on PAC 19(ON),when I restart the machine,the computer did not power Edited September 3, 2021 by Kodjo Taiwo Quote Link to comment Share on other sites More sharing options...
Kodjo Taiwo Posted September 3, 2021 Author Report Share Posted September 3, 2021 54 minutes ago, Kodjo Taiwo said: When I got to the lab the second day,I switched the 330 machine,it ON but I discovered that the PRW22 POWER BOARD, usually has three types of light,but only two lights on out the three colors of light, which is green and yellow light,the red light didn't ON,the machine computer couldn't boot the IOS of the computer. Quote Link to comment Share on other sites More sharing options...
Minilab service Posted September 4, 2021 Report Share Posted September 4, 2021 Check power suppliers. Inputs should have 230V a.c. Also check power supply voltages on output modules. Some modules have small connectors. Using them minilab these modules can power on, or power off. Check voltages on modules, which have not them. There voltages should be always. Quote Link to comment Share on other sites More sharing options...
Kodjo Taiwo Posted September 11, 2021 Author Report Share Posted September 11, 2021 After I change the Alpha 400 and I change the CTP 22 battery,then the machine work perfectly ok. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.