Jump to content

Arcnet error


Johnfadare
 Share

Recommended Posts

6901-0200 means missing ARCNET connection between printer control pcb and laser control pcb. Can be:
missing power supply on laser control pcb 
bad ARCNET connection on laser control pcb
bad ARCNET connection on printer control pcb ( cables, which go to laser control pcb )
not working laser control pcb

Check power suppliers on laser control pcb ( 5V on J/P1506 and 12V on J/P1505 ) 
Clean ARCNET connectors on laser control pcb ( J/P1516 and J/P1517 ) , trim ends of ARCNET cables ( 90 degrees ) and connect ARCNET cables back
Clean ARCNET connectors ( J/P212 and J/P213 ) on printer control pcb , trim ends of ARCNET cables ( 90 degrees ) and connect ARCNET cables back

If all that will not help then laser control pcb is not working. I have this board, if will need it.

Edited by Minilab service
Link to comment
Share on other sites

1 hour ago, Minilab service said:

6901-0200 means missing ARCNET connection between printer control pcb and laser control pcb. Can be:
missing power supply on laser control pcb 
bad ARCNET connection on laser control pcb
bad ARCNET connection on printer control pcb ( cables, which go to laser control pcb )
not working laser control pcb

Check power suppliers on laser control pcb ( 5V on J/P1506 and 12V on J/P1505 ) 
Clean ARCNET connectors on laser control pcb ( J/P1516 and J/P1517 ) , trim ends of ARCNET cables ( 90 degrees ) and connect ARCNET cables back
Clean ARCNET connectors ( J/P212 and J/P213 ) on printer control pcb , trim ends of ARCNET cables ( 90 degrees ) and connect ARCNET cables back

If all that will not help then laser control pcb is not working. I have this board, if will need it.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...