BIILEL Posted September 12, 2021 Report Share Posted September 12, 2021 where is the problem ? help me please Is there a solution to this problem! Quote Link to comment Share on other sites More sharing options...
yustas Posted September 12, 2021 Report Share Posted September 12, 2021 Something stops the paper during exposure if the line is across the paper movement. Check paper advance unit for a faulty rollers and belts. BIILEL 1 Quote Link to comment Share on other sites More sharing options...
BIILEL Posted September 13, 2021 Author Report Share Posted September 13, 2021 ??????? Quote Link to comment Share on other sites More sharing options...
Dboy Posted September 13, 2021 Report Share Posted September 13, 2021 Factors and Actions for E-2592 Message Exposing process failed. If problems persist, consult your technical representative. Factors When the exposure process is not completed: 1. The center memory image exposure fails. 2. The image exposure has been completed, however jammed paper remains in the exposure section. (In this case, W-2406 ”Paper jam occurred between exposure section and distribution entrance section (6).” or W-2447 “Paper jam occurred between distribution entrance section and printer exit section (7).” is displayed at the same time.) Actions 1. Open and close the magazine door so that the printing can be resumed. 2. Open the magazine door, remove the paper, and then close the door as the same countermeasure against paper jamming so that the printing can be resume BIILEL 1 Quote Link to comment Share on other sites More sharing options...
Dboy Posted September 13, 2021 Report Share Posted September 13, 2021 Definitely stopping during exposure. Subscan section - possibly the steel belt. Factors and Actions for E-2592 Message Exposing process failed. If problems persist, consult your technical representative. Factors When the exposure process is not completed: 1. The center memory image exposure fails. 2. The image exposure has been completed, however jammed paper remains in the exposure section. (In this case, W-2406 ”Paper jam occurred between exposure section and distribution entrance section (6).” or W-2447 “Paper jam occurred between distribution entrance section and printer exit section (7).” is displayed at the same time.) Actions 1. Open and close the magazine door so that the printing can be resumed. 2. Open the magazine door, remove the paper, and then close the door as the same countermeasure against paper jamming so that the printing can be resume Quote Link to comment Share on other sites More sharing options...
Dboy Posted September 13, 2021 Report Share Posted September 13, 2021 BIILEL 1 Quote Link to comment Share on other sites More sharing options...
yustas Posted September 13, 2021 Report Share Posted September 13, 2021 As I wrote above - check everything concerning paper movement during exposure. Laser unit does not move the laser beam along the paper. Lab moves the paper using stepping motors, belts, etc. So dig there... Or call out the service engineer and pay him! BIILEL 1 Quote Link to comment Share on other sites More sharing options...
BIILEL Posted September 14, 2021 Author Report Share Posted September 14, 2021 17 hours ago, Dboy said: thank you so much Quote Link to comment Share on other sites More sharing options...
arche hernandez sanchez Posted September 14, 2021 Report Share Posted September 14, 2021 On 9/12/2021 at 11:50 AM, BIILEL said: ¿dónde está el problema? ayúdame por favor ¿Hay una solución a este problema? It is not pulling the paper well, a motor or something like that makes it not advance and synchronize when advancing Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.