Jump to content

Ms01 licence password.


Recommended Posts

LP7500 is not new. It is old printer made by Noritsu about 15 years ago. Real Fuji LP7500 name is Noritsu QSS3702 F. 

My advice is through out old computer with Fuji software. Then take new modern computer with Windows 10 PRO 64 bit. There install modern software - EZ controller version 7.20 , system software version 19, profiles 4.8, capacity booster ( the same which have with Fuji ) and optional modules. Then you can have all new features, which has not old software, which is for Fuji branded minilabs.

Which MS01 version do you have? Standard MS01 ( versions 2.1, 2.5.5, 3.0, 3.1, 4.0, 4.2 and 10.0 ) don't need any passwords and have not time limits. But for LP7500 Fuji has very old system software ( version 4 ) and old profiles ( missing new papers ) . Software has not new features, which added on new version.

Write private message and I can explain how instead old Fuji software have new software from Noritsu. 

Link to comment
Share on other sites

Standard MS01 3.1 doesn't need any passwords. Use it, or upgraded MS01 versions. With newer MS01 LP7500 system software should be version 4.0 ( the latest ) . Of course the best would be to use Noritsu software, where system software has version 19.0. It has new upgrades and features.

Edited by Minilab service
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...