Jump to content

frontier 570 Ldd23

Алiна Тагiльцева

Recommended Posts

LDD23 is not programmable from outside. It is plug and play board. Just enough to connected and it should work on any minilab, or stand alone prinbter ( 550, 570, LP5500, LP5700, LP5500R, LP5700R ) .

You have various errors, which can cause LDD23 board. Sometimes LDD23 board doesn't turn on power supply slot with 8V and 24V outputs. I think LDD23 board is faulty and you need replace it. To be 100 % need test your board on other minilab, or stand alone printer, or your minilab test with other board.  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...